The American Standard 216BD.004.020 has been discontinued
** See similar or replacement items below **
American Standard Cadet Pro Round Two-Piece Corner Toilet with Performance Flushing System, Right Height Bowl and Everclean Surface - Less Seat
Model: 216BD.004.020
Product Overview
This product has additional required/recommended options. To configure, add to your cart.
- Toilet Seat Required
American Standard Cadet Pro 216BD.004 Product Features:
- Two-piece round toilet
- Right Height
- Left mounted tank lever
- Tank flushing components specially engineered to withstand chemically-treated urban water
- 100% factory flush tested – guaranteed to perform
- Quick and quiet, industry-leading flushing system with PowerWash rim out-performs older toilets while using less than 1/2 the water
- EverClean porcelain surface
- Covered under American Standard's limited 5 year warranty
- Toilet seat is not included - when adding to cart, options that fit this toilet will be presented
Cadet 3 Flushing Technologies / Benefits:
- 3" Flush Valve - The flush starts with a flushing system that employs a 3” valve opening, allowing water to enter the bowl at a much faster rate than the industry standard 2” flush valve. Controlled by a flapper that is engineered to be chemical-resistant, the Cadet flushing valve system is highly regarded for its durability.
- 360 Degree Cleaning - Water entering the bowl does so in a sweeping 360-degree motion. This is designed to help completely clear the bowl, even while using less water.
- Powerful Siphoning Water Jet - A perfectly positioned water jet captures the circular flow of water for optimal performance with minimal energy loss (water doesn’t hit a flat spot and slow down). As waste and water exit, they are siphoned into the trapway for an unmatched push/pull one-two punch.
- 2-1/8" Fully Glazed Trapway - Waste and water exit the toilet through a trapway that is fully glazed, which seals it and provides for a smooth surface that waste can in no way cling to. The 2-1/8” diameter chute, while slightly narrower than the American Standard Champion flushing system’s 2-3/8” trapway, can still flush up to 150 feet of toilet paper without clogging. Not that you’ll ever use that much.
- PwerWash Rim - During each flush, a measured amount of water travels within and inner-rim channel to be evenly dispersed throughout the bowl. PowerWash rims are surprisingly good at completely clearing out the bowl after each use.
American Standard Cadet Pro 216BD.004 Other Technologies / Benefits:
EverClean: Using the antimicrobial properties of silver (the precious metal), Everclean Surfaces inhibit the growth of bacteria, mold, and mildew. The super smooth, baked-in, mirror-like surface not only eliminates water spots, but also helps repel messes.
Right Height: Right Height bowls lift the sitting-height an additional 1.5 inches off the ground for a more comfortable seated position that is easier to get in and out of. This feature is particularly well liked by men, taller women, and the elderly.
ADA Compliant: ADA compliant products are designed to make their use easier, safer, and more comfortable for people with disabilities or limited mobility. American Standard has a selection of ADA products to compliment nearly any bathroom design.
American Standard Cadet Pro 216BD.004 Specifications:
- Overall Height: 32-1/16" measured from the bottom of the base to the highest point on the toilet)
- Overall Length: 33-3/16" (measured from the back of the tank to the front of the rim)
- Overall Width: 19-3/8" (measured from the furthest point on the left to the furthest on the right)
- Bowl Height: 16-1/2" (measured from the bottom of the base to the rim)
- Rough-In: 12" (measured from wall behind toilet to center of waste outlet hole in floor)
- Flush Valve Size: 3" (diameter of the inlet for water entering bowl from tank)
- Trapway Size: 2-1/8" (diameter of the outlet for water/waste exiting the bowl)
- Flow Rate: 1.6 GPF (gallons-per-flush)
- Water Area: 9" x 8" (inner rim dimensions length X width)
- Tank Trip Lever Placement: Left
About American Standard:
An American brand with over 140 years of innovations, American Standard is defined by experience, intelligence, and indelible influence. As the patriarch for nearly every key product category for the kitchen and bath, their offering shows a level of thoughtfulness and sophistication that could only be attributed to a company with a legacy as rich as that of American Standard. Today, professional plumbers and contemporary DIY home owners continue to turn to American Standard because they appreciate this legacy and know they can trust the innovations behind each product. It is for this reason that American Standard is so widely used within residential and commercial projects in both the United States and abroad - their products truly deliver, just as they have for generations.
Additional American Standard Links
This product is listed under the following manufacturer number(s):
- American Standard 216BD.004.021*
Bone - American Standard 216BD.004.222*
Linen - American Standard 216BD.004.020*
White
*Denotes a finish or option that has been discontinued.
Send to a Friend