Item # bci2245223
American Standard Cadet Pro Elongated Two-Piece Toilet with EverClean Surface, PowerWash Rim and Chair Height Bowl - 10" Rough In
Model: 215AB004.020
from the Cadet Pro Collection
$303.55
Finish: Choose Finish
- White$303.55533 In Stock
Variation: Right Height Elong, 10" Rough
Right Height Elong, 10" Rough
Round Bowl, 10" RoughRight Height Elong, 14" RoughFree Shipping on LTL freight orders over $1,499.00!
Leaves the Warehouse Tomorrow, December 16th
This package includes the following items
Product Overview
This product has additional required/recommended options. To configure, add to your cart.
- Toilet Seat Required
- Wax Ring Kit Required
Product Features:
- Fully covered under a 5 year warranty - 5 times the industry standard
- Quick, quiet flushing - American Standard toilets are famously efficient and hushed
- Industry-leading flushing system out-performs older toilets while using less than 1/2 the water
- Tank flushing components specially engineered to withstand chemically-treated urban water
- EverClean porcelain surface is extremely easy to keep clean, including inside the bowl
- PowerWash flushing completely clears the bowl, including under the bowl rim
- Sanitary bar on bowl prevents liquids from traveling under the tank
- Elongated bowl shape - more comfortable than a round bowl
- Two-piece toilet - less cumbersome than one-piece designs to lift, carry, and install
- Chair-height bowl - easier to sit and stand; appropriate for adults and the elderly
- Left mounted tank lever
- Perfected porcelain casting process and adjustable tank anchors eliminate "tank wobbles"
- Straight-forward installation instructions are included with each toilet
- 100% factory flush tested - guaranteed to perform
- Toilet seat is not included - when adding to cart, options that fit this toilet will be presented
- Wax ring kit (for installation) is not included - when adding to cart, this inexpensive item will be presented
Cadet 3 Flushing:
- 3” flush valve – The flush starts with a flushing system that employs a 3” valve opening, allowing water to enter the bowl at a much faster rate than the industry standard 2” flush valve. Controlled by a flapper that is engineered to be chemical-resistant, the Cadet flushing valve system is highly regarded for its durability.
- 360 degree cleaning – Water entering the bowl does so in a sweeping 360-degree motion. This is designed to help completely clear the bowl, even while using less water.
- Powerful siphoning water jet – A perfectly positioned water jet captures the circular flow of water for optimal performance with minimal energy loss (water doesn’t hit a flat spot and slow down). As waste and water exit, they are siphoned into the trapway for an unmatched push/pull one-two punch.
- 2-1/8” fully glazed trapway – Waste and water exit the toilet through a trapway that is fully glazed, which seals it and provides for a smooth surface that waste can in no way cling to. The 2-1/8” diameter chute, while slightly narrower than the American Standard Champion flushing system’s 2-3/8” trapway, can still flush up to 150 feet of toilet paper without clogging. Not that you’ll ever use that much.
Other Technologies / Benefits:
- Everclean Surface – Using the antimicrobial properties of silver (the precious metal), Everclean Surfaces inhibit the growth of bacteria, mold, and mildew. The super smooth, baked-in, mirror-like surface not only eliminates unsightly rings, but also helps repel toilet messes.
- PowerWash Rim – During each flush, a measured amount of water travels within an inner-rim channel to be evenly dispersed throughout the bowl. PowerWash rims are surprisingly good at completely clearing out the bowl after each use.
- Right Height – Right Height bowls lift the sitting-height an additional 1.5 inches off the ground for a more comfortable seated position that is easier to get in and out of. This feature is particularly well liked by men, taller women, and the elderly.
Product Specifications:
- Overall Height: 30-3/8" (bottom of the base to the highest point on the toilet)
- Overall Length: 28-1/4" (back of the tank to the front of the rim)
- Overall Width: 18-1/8" (furthest point on the left to the furthest on the right)
- Bowl Height: 16-1/2" (bottom of the base to the rim)
- Rough In: 10" (wall behind toilet to center of waste outlet hole in floor)
- Flush Valve Size: 3" (diameter of the inlet for water entering bowl from tank)
- Trapway Size: 2-1/8" (diameter of the outlet for water/waste exiting the bowl)
- Flow Rate: 1.6 GPF (gallons-per-flush)
- Water Area: 9" X 8" (inner rim dimensions length X width)
- Water Depth (From Rim): 6-1/2"
- Tank Trip Lever Placement: Left
Why Buy American Standard From Us:
- We are an American Standard Preferred Authorized Online Dealer
- We Only Ship Showroom Quality products vs Builder Grade quality found at big box retailers
- All metal parts, not plastic like some of our competitors
- Customer Care Experts Available 7 Days a Week to Serve You Before & After Purchase
- A Showroom Experience from the Comfort of Your Home or Office
Additional American Standard Links
This product is listed under the following manufacturer number(s):
Manufacturer Resources
Dimensions and Measurements
Bowl Height
16.5 in.
Depth
28.25 in.
Flush Valve Size
3 in.
Gallons Per Flush
1.6
Height
30.375 in.
Rough In
10 in.
Trapway
2.125 in.
Water Area
9 x 8
Width
18.125 in.
Included Components
Seat Included
No
Characteristics and Features
Bowl Shape
Elongated
Configuration
Two Piece
Design Features
Glazed Trapway, Chair Height
Flush Type
Siphon Jet
Installation Type
Floor Mounted
Material
Vitreous China
Theme
Basic
Trip Lever Placement
Left
Manufacturer Technology
Flush Technology
Cadet
Warranty and Product Information
ADA
Yes
Approved for Commercial Use
No
CA Drought Compliant
No
Collection
Everclean, Cadet Pro, Cadet
Manufacturer Warranty
5 Year
Series
Cadet
TX Drought Compliant
No
WaterSense Certified
No
Product Videos
How to remove and install a Toilet
If you have been considering replacing your toilet, yet are wonde...
Send to a Friend