The American Standard 2403.328.021 has been discontinued
** See similar or replacement items below **
American Standard Cadet 3 Compact Elongated One-Piece Toilet with EverClean Surface and Right Height Bowl
Model: 2403.328.021
Product Overview
Replaced by model 2403.128
Product Features:
- Compact design allows for elongated bowl shape that fits in the space of a round-front
- Fully covered under a 5 year warranty - 5 times the industry standard
- Quick, quiet flushing - American Standard toilets are famously efficient and hushed
- Industry-leading flushing system out-performs older toilets while using less than 1/2 the water
- Tank flushing components specially engineered to withstand chemically-treated urban water
- EverClean porcelain surface is extremely easy to keep clean, including inside the bowl
- Elongated bowl shape - more comfortable than a round bowl
- One-piece toilet - seamless, easier to keep clean; lends to a more refined look
- Chair-height bowl - easier to sit and stand; appropriate for adults and the elderly
- Left mounted tank lever
- Straight-forward installation instructions are included with each toilet
- 100% factory flush tested - guaranteed to perform
- Wax ring kit (for installation) is not included - when adding to cart, this inexpensive item will be presented
Cadet 3 Flushing:
- 3” Flush Valve – The flush starts with a flushing system that employs a 3” valve opening, allowing water to enter the bowl at a much faster rate than the industry standard 2” flush valve. Controlled by a flapper that is engineered to be chemical-resistant, the Cadet flushing valve system is highly regarded for its durability.
- 360 Degree Cleaning – Water entering the bowl does so in a sweeping 360-degree motion. This is designed to help completely clear the bowl, even while using less water.
- Powerful Siphoning Water Jet – A perfectly positioned water jet captures the circular flow of water for optimal performance with minimal energy loss (water doesn’t hit a flat spot and slow down). As waste and water exit, they are siphoned into the trapway for an unmatched push/pull one-two punch.
- 2-1/8” fully glazed trapway – Waste and water exit the toilet through a trapway that is fully glazed, which seals it and provides for a smooth surface that waste can in no way cling to. The 2-1/8” diameter chute, while slightly narrower than the American Standard Champion flushing system’s 2-3/8” trapway, can still flush up to 150 feet of toilet paper without clogging. Not that you’ll ever use that much.
Other Technologies / Benefits:
- EverClean Surface – Using the antimicrobial properties of silver (the precious metal), EverClean Surfaces inhibit the growth of bacteria, mold, and mildew. The super smooth, baked-in, mirror-like surface not only eliminates unsightly rings, but also helps repel toilet messes.
- Right Height – Right Height bowls lift the sitting-height an additional 1.5 inches off the ground for a more comfortable seated position that is easier to get in and out of. This feature is particularly well liked by men, taller women, and the elderly.
Product Specifications:
- Overall Height: 28-1/2" (measured from the bottom of the base to the highest point on the toilet)
- Overall Length: 28-1/2" (measured from the back of the tank to the front of the rim)
- Overall Width: 15" (measured from the furthest point on the left to the furthest on the right)
- Bowl Height: 16-1/2" (measured from the bottom of the base to the rim)
- Rough In: 12" (measured from wall behind toilet to center of waste outlet hole in floor)
- Flush Valve Size: 3" (diameter of the inlet for water entering bowl from tank)
- Trapway Size: 2-1/8" (diameter of the outlet for water/waste exiting the bowl)
- Flow Rate: 1.28 GPF (gallons-per-flush)
- Water Area: 10" X 8" (inner rim dimensions length X width)
- Water Depth (From Rim): 11"
- Tank Trip Lever Placement: Left
Variations:
- 2403.328 - This model
- 2235.128US - Two-piece version of this model
- 2403.128 - This model + seat
- 2403.813 - This model with right-hand trip lever
About American Standard:
An American brand with over 140 years of innovations, American Standard is defined by experience, intelligence, and indelible influence. As the patriarch for nearly every key product category for the kitchen and bath, their offering shows a level of thoughtfulness and sophistication that could only be attributed to a company with a legacy as rich as that of American Standard. Today, professional plumbers and contemporary DIY home owners continue to turn to American Standard because they appreciate this legacy and know they can trust the innovations behind each product. It is for this reason that American Standard is so widely used within residential and commercial projects in both the United States and abroad - their products truly deliver, just as they have for generations.
Additional American Standard Links
This product is listed under the following manufacturer number(s):
- American Standard 2403.328.178*
Black - American Standard 2403.328.021*
Bone - American Standard 2403.328.222*
Linen - American Standard 2403.328.020*
White
*Denotes a finish or option that has been discontinued.
Manufacturer Resources
Dimensions and Measurements
Included Components
Characteristics and Features
Manufacturer Technology
Warranty and Product Information
American Standard Cadet 3 Review
Join Milan Rosan and Build.com as he shows us the features and be...American Standard Cadet 3 Flushing Test
Look and see why the Cadet 3 series of toilets can handle anythin...
Send to a Friend