Item # bci3071207
Halsey Taylor HydroBoost® Single Station Indoor Water Fountain Cooler and Bottle Filler - Barrier free with Vandal Resistant Bubbler
Model: HTHB-HVRGRN8-WF
from the HydroBoost Collection
$2,134.30
Finish: Choose Finish
- Stainless Steel$2,134.30Special Order
Free Shipping!
Product Overview
Halsey Taylor HTHB-HVRGRN8-WF Features:
- Covered under Halsey Taylor's 5 year limited warranty on any refrigeration systems or 12 month limited warranty for electrical/water system components
- Single station drinking fountain
- A cleanable strainer screen is provided to trap waterborne particulate of 140 microns or bigger prior to entering the cooler
- Key plastic components are integrated with silver ion anti-microbial protection to inhibit growth of mold and mildew
- Filter included
- Sensor activated HydroBoost® bottle filling station with 1.1/1.5 GPM flow rate included
- Vandal-resistant, easy to operate front push-button control
- Valve with built-in flow regulator to provide constant stream from 40 to 105 psi water pressure
- Barrier-free drinking station complies with ADA regulations
Halsey Taylor HTHB-HVRGRN8-WF Construction:
- 300 series nickel bearing stainless steel basin polished to a lustrous satin finish
- Contoured basin offers large area to minimize splashing when in use
- Stainless Steel Basin - One piece basin has integral drain grid, embossed bubbler pad. No exposed fasteners
- Mounting frame is manufactured of corrosion resistant, galvanized steel. Open construction designed for ease of installation.
- Vandal-resistant bubbler is one-piece with chrome plating
Halsey Taylor HTHB-HVRGRN8-WF Cooling System:
- Motor Compressor - Hermetically sealed, reciprocating type, single phase. Sealed in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug
- Condenser - Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated
- Cooling Unit - Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated with EPS foam (UL listed for self-extinguishing material)
- Refrigerant Control - Refrigerant type HFC-134a is controlled by accurately calibrated capillary tube for positively trouble free performance
- Temperature Control - Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements
Halsey Taylor HTHBHVRGRN8WF Specifications:
- Base Cooling Capacity (GPH): 8
- Rated Watts: 260
- Full Load Amps: 3.8
- Fountain Type: Non-Refrigerated
- Installation: Wall Mounted
- Voltage: 115
- Height: 46-1/4" (base to top of fixture)
- Length: 18" (left to most right rim of fixture)
- Width: 18-5/8" (back to front of fixture)
- Bottle Filler: Yes
- Vandal Resistant Bubbler: Yes
Additional Halsey Taylor Links
This product is listed under the following manufacturer number(s):
- Halsey Taylor HTHB-HVRGRN8-WF
Stainless Steel
Manufacturer Resources
Dimensions and Measurements
Cooling Capacity
8 GPH
Height
46.25 in.
Inlet Diameter
.375 in.
Length
18 in.
Outlet Diameter
1.5 in.
Product Weight
89 lbs.
Water Pressure (Max)
105 PSI
Water Pressure (Min)
40 PSI
Width
18.625 in.
Included Components
Bottle Filler Included
Yes
Cooling Unit
Yes
Characteristics and Features
Antimicrobial
Yes
Bi-Level
Yes
Control Type
Push Button
Filtered
Yes
Hands Free
Yes
Installation Type
Wall Mounted
Material
Stainless Steel
Number of Stations
1
Pet Friendly
No
Vandal Resistant
Yes
Electrical and Operational Information
Amperage
3.8
Electrical Phases
1
Frequency
60 Hertz
Voltage
115
Wattage
260
Warranty and Product Information
ADA
Yes
Approved for Commercial Use
Yes
ASME Code
A112.19.3
Certifications
NSF, ASME, UL
Collection
Yes
Lead Leaching Certified NSF/ANSI 61
Yes
Location Rating
Dry Location
Manufacturer Warranty
1 Year Limited
Outdoor Approved
No
Send to a Friend