Item # bci912519

Little Giant 50 GPM Automatic Submersible High Temperature Effluent Pump

Model: 506600

$944.63
Finish: Choose Finish
  • Steel
    Steel
    $944.63
    Special Order

Free Shipping!

Special Order

Product Overview

50 GPM Automatic Submersible High Temperature Effluent Pump

This high temperature version of the 6E Sump/Effluent Pump is capable of pumping heated liquid up to 200°F liquid. Uses include boiler blow-down sump pits, rendering plant wash-down sump pits, public utility underground transformer vaults, industrial steam cleaning sump pits, etc. These pumps handle liquids and solid waste materials up to 1/2" in diameter. Pumps feature a 1-1/2" discharge, with a lift of 20'. Cast iron housing and volute with protective epoxy coating, high-temperature thermoplastic base and vortex nylon impeller.

  • Handles liquids up to 200° F
  • 1/2" solids handling capability
  • Cast iron pump housing with protective epoxy coating for corrosion resistance
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
  • Integral mechanical float switch
  • Stainless steel screws, bolts and lifting ring to protect against corrosion
  • Mechanical seals (stainless steel spring, Carbon and Ni-Resist faces) to assure maximum protection against pump failure
  • Bearings: Upper and lower sintered sleeve bearings for extended motor life
  • Thermal overload protection
  • Automatic operation has 10" to 12" "On" level range

This product is listed under the following manufacturer number(s):

Dimensions and Measurements

Cord Length
15 in.
Depth
8.7 in.
Discharge Diameter
1.5 in.
Flow Rate by Feet of Head
42 gal / 10 ft, 50 gal / 5 ft, 27 gal / 15 ft
Height
10.9 in.
Length
8.8 in.
Maximum Diameter Solids
0.5 in.
Maximum Head Height
20 in.
Minimum Head Height
5 in.
Product Weight
32 lbs.
Shut Off Height
20 in.
Shut Off Pressure
8.7
Water Connection
1-1/2"
Water Pressure (Max)
8.7 PSI
Width
8.5 in.

Characteristics and Features

Automatic
Yes
Configuration
Sump / Effluent Pump
Impeller Material
Nylon
Material
Cast Iron
Material Casing
Iron
Material Housing
Iron
Shutoff Head in Feet
20
Submersible
Yes
Switch Type
Mechanical Float
Water Connection Type
NPT

Electrical and Operational Information

Amperage
10.1
Electrical Phases
1
Frequency
60 Hertz
Horsepower
0.33, 0.34
Maximum Fluid Temperature
200 °F
Voltage
115
Wattage
735

Warranty and Product Information

Approved for Commercial Use
Yes
Certifications
CSA