Item # bci2130485

Little Giant 1 HP 160 GPM 230V Manual Submersible Sewage Ejector Pump

Model: 514620

$1,890.91
Finish: Choose Finish
  • N/A
  • N/A
    N/A
    $1,890.91
    Special Order

Free Shipping!

Leaves the Warehouse in 6 to 11 weeks
Special Order

Product Overview

1 HP 160 GPM 230V Manual Submersible Sewage Ejector Pump

The Eliminator(R) submersible pump series from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas.

  • 1 HP permanent split capacitor motor with overload protection (single phase models)
  • Designed for continuous duty
  • 20 foot power cord without plug
  • Epoxy coated cast iron housing, cover and volute
  • 3" FNPT (76 mm) discharge
  • Carbon/ceramic shaft seal
  • Two vane non-clog epoxy coated cast iron impeller
  • Upper and lower ball bearings

This product is listed under the following manufacturer number(s):

Dimensions and Measurements

Cord Length
240 in.
Depth
9.89 in.
Discharge Diameter
3 in.
Flow Rate by Feet of Head
100 gal / 20 ft, 40 gal / 30 ft, 160 gal / 10 ft
Height
17.2 in.
Length
14.1 in.
Maximum Diameter Solids
2 in.
Maximum Head Height
35 in.
Minimum Head Height
10 in.
Product Weight
94 lbs.
Shut Off Height
35 in.
Shut Off Pressure
15.1
Water Connection
2"
Water Pressure (Max)
15.1 PSI
Width
9.9 in.

Characteristics and Features

Automatic
No
Configuration
Submersible Pump
Impeller Material
Cast Iron
Material
Cast Iron
Material Casing
Iron
Material Housing
Iron
Shutoff Head in Feet
35
Submersible
Yes
Switch Type
Manual
Water Connection Type
NPT

Electrical and Operational Information

Amperage
11
Electrical Phases
1
Frequency
60 Hertz
Horsepower
1
Maximum Fluid Temperature
140 °F
Voltage
230
Wattage
1900

Warranty and Product Information

Approved for Commercial Use
Yes
Certifications
UL, CSA