Item # bci1346064

Schlage Right Handed Double Cylinder Addison Handleset with Manhattan Interior Lever from the F-Series

Model: F62ADD505MNHRH

from the Addison Collection
$451.33
Finish: Choose Finish
  • Satin Nickel
  • Satin Nickel
    Satin Nickel
    $451.33
    Special Order

Special Order
Configure Your Schlage F62-ADD-MNH-RH Right Handed Double Cylinder Addison Handleset with Manhattan Interior Lever from the F-Series
  • Free Keying Option

    Free Keying Option

    Select "Keyed Alike" to use the same key on multiple locks, "Keyed Different" for unique keys, or enter a key code (Typically a 5 digit number) to match this lock to pre-owned locks. Locksmiths can identify key codes on pre-owned locks.

    Please Select One

Product Overview

Two keys will be shipped per lock. Three or more items keyed alike will ship a total of 6 keys

Schlage F62-ADD-MNH-RH Right Handed Double Cylinder Entrance Lock with Interior Manhattan Lever from the Addison Collection

  • Addison double cylinder handle set with Manhattan interior lever, used for Right handed applications.
  • The deadbolt is thrown or retracted by a key from either side.
  • Door latch is retracted by a thumb piece from the outside or by the inside lever
  • Bolt automatically deadlocks when it is fully thrown.
    • Installation should be in accordance with existing codes only, to ensure life safety emergency egress.
    • Only for Right handed applications
    • Solid Brass Exterior Trim
    • Wrought Brass Interior Trim
    • Lifetime Limited Mechanical and Finish Warranty
    • Exterior Handleset Height: 12-7/16"without the deadbolt
    • Exterior Handle Projection: 3-3/16"
    • Interior Lever Length: 4-9/16"
    • Interior Rose Diameter: 2-3/4"
    • Interior Lever Projection: 2-7/16"
    • Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
    • Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"

This product is listed under the following manufacturer number(s):


*Denotes a finish or option that has been discontinued.

Dimensions and Measurements

Backset
2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"
Center to Center
4, 5.5 in.
Cross Bore
2-1/8"
Door Thickness
1-3/4", 1-5/8", 1-7/8", 2"
Edge Bore
1"
Grip Center to Center
8.5 in.
Handle Projection
3.1875 in.
Trim Height
12.4375 in.

Included Components

Cylinder Included
Yes
Interior Included
Yes

Characteristics and Features

Adjustable Throughbolt
Yes
Cylinder
5 Pin Schlage C
Cylinder Type
Double Cylinder
Function
Keyed Entry, Double Cylinder
Handing
Right
Handle Design
Manhattan
Handle Material
Metal
Handle Style
Grip
Handleset Design
Addison
Interior Handle Style
Lever
Keyway
C
Latch Faceplate
Drive-In, Round Corner, Square Corner
Lock Style
Single Point
Mount
Sectional
Shape
Flat
Style
Contemporary/Modern
Theme
Modern
Trim Design
Addison

Warranty and Product Information

ADA
No
ANSI Certification
A156.5
Approved for Commercial Use
No
BHMA Certification
Grade 2
Certifications
ANSI
Collection
Addison
Series
F-Series