Item # bci1857991

Schlage Callington Right Handed Single Cylinder Keyed Entry Storeroom Door Lever Set with Decorative Andover Trim

Model: F80CLT716ANDRH

from the Andover Collection
$84.92
Finish: Choose Finish
  • Matte Black
  • Matte Black
    Matte Black
    $84.92
    Special Order

Special Order
Configure Your Schlage F80-CLT-AND-RH Callington Right Handed Single Cylinder Keyed Entry Storeroom Door Lever Set with Decorative Andover Trim
  • Free Keying Option

    Free Keying Option

    Select "Keyed Alike" to use the same key on multiple locks, "Keyed Different" for unique keys, or enter a key code (Typically a 5 digit number) to match this lock to pre-owned locks. Locksmiths can identify key codes on pre-owned locks.

    Please Select One

Product Overview

storeroom-functionStoreroom Function: Schlage storeroom lever sets feature an outside lever that is always locked while the inside knob is always unlocked and free turning. Entry from exterior is only possible via key.

right-handed-informationRight Handed: Handing is determined by standing on the outside of a room, facing the door, and noting on which side the door hinges are located. This handle is right handed, and so when standing outside of the room and facing the door the hinges will be on your right.

Product Features:

lifetimeA Lifetime Mechanical and Finish Warranty gives you the peace of mind that this product will be looking good and functioning smoothly for as long as you own it. (Finish warranty does not include Oil Rubbed Bronze because it is a living finish and it is expected to patina over time)

easyinstallInstallation is easy, all you need is a screwdriver and a little time. The set is designed to fit standard prep doors and most installations should take just a matter of minutes.

grade2BHMA/ANSI Grade 2 certified which indicates excellent performance across a range of residential applications. This product is built from high-quality materials to give you exceptional security.

Specifications:

  • Backset: 2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Edge Bore: 1"
  • Door Thickness: 1-1/2", 1-3/4", 1-3/8", 1-5/8"
  • Handing: Right
  • Handle Design: Callington
  • Trim Design: Andover
  • Product Weight: 1.5 lbs
  • Latch Faceplate: Drive-in, Square Corner, Round Corner
  • Cylinder: 5 Pin Schlage C
Product Variations:
  • F80-CLT-AND-LH: Left Handed Keyed Entry Lever Set
  • F80-CLT-AND-RH (This Model): Right Handed Keyed Entry Lever Set

This product is listed under the following manufacturer number(s):


*Denotes a finish or option that has been discontinued.

Dimensions and Measurements

Backset
2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"
Cross Bore
2-1/8"
Door Thickness
1-3/4", 1-3/8"
Edge Bore
1", 7/8"
Handle Length
4.5 in.
Handle Projection
2.25 in.
Trim Height
2.75 in.
Trim Width
2.75 in.

Included Components

Cylinder Included
Yes

Characteristics and Features

Concealed Screws
Yes
Cylinder
5 Pin Schlage C
Function
Keyed Entry, Storeroom
Handing
Right
Handle Design
Callington
Handle Material
Metal
Keyway
C
Latch Faceplate
Drive-In, Round Corner
Lever Shape
Scroll, Wave
Panic Proof
Yes
Rosette Shape
Round
Theme
Traditional
Trim Design
Andover

Warranty and Product Information

ADA
Yes
ANSI Certification
A156.5
Approved for Commercial Use
No
BHMA Certification
Grade 2
Certifications
ANSI
Collection
Andover
Fire Rated
No
Series
F-Series