Sloan Royal Slimline Bedpan Washer 1.6 GPF Water Closet Flushometer with Elbow and Pipe Support

Bedpan Washer Water Closet Flushometer with Deoseptic Unit

For floor mounted or wall hung top spud bowls. Includes Elbow and Pipe Support for installation when replacing an existing Flushometer with a lower water supply rough-in height (pipe between Elbow and Angle Stop supplied by others). Installation meets ADA height requirements. Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037 and ANSI/ASME A112.19.2.

• Dual Filtered Bypass
• ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing
• 1" I.P.S. Screwdriver Bak-Chek Angle Stop
• 1" I.P.S. Chrome Plated Elbow and Solid Ring Pipe Support
• Free Spinning Vandal Resistant Stop Cap
• Adjustable Tailpiece
• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut
• Spud Coupling and Flange for 1½" Top Spud
• Sweat Solder Adapter w/Cover Tube & Cast Wall Flange w/Set Screw
• Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX rubber compound for Chloramine resistance
• 100% of the energy used in manufacturing is offset with Renewable Energy Sources – Wind Energy
• Bedpan Washer Diverter Assembly with the following features:
• Solid One-piece Body Construction
• Solid Brass Spray Arm
• Counter Balanced Pivot Assembly
• Diverter Valve Wall Support
• Water Conserving 1.6gpf